STYLO P24 Articulated Arm Swing Gate Motor

Product Overview

The CAME STYLO P24 is a 24V articulated arm swing gate motor, supplied as a standalone motor only, designed for light residential swing gates where space is limited or pillar geometry makes linear motors unsuitable.

With encoder-controlled movement, built-in obstacle detection and intensive-use capability, the Stylo P24 is ideal for single gate leaf automation when paired with a compatible CAME control panel and safety devices.

Key Benefits

Motor only – ideal for replacements or custom systems
24V articulated arm design for narrow or offset pillars
Encoder-controlled movement with obstacle detection
Adjustable slow-down on opening and closing
Integrated open & close limits
Intensive-use rated for frequent daily operation
Above-ground installation with minimal groundwork

Gate Capacity & Limits

Specification	Value
Max gate leaf length	1.8 m
Max gate leaf weight	150 kg
Max opening angle	Up to 120°
Motor voltage	24 V
Duty cycle	Intensive use
Installation type	Above-ground articulated arm

What’s Included

Component	Included
STYLO P24 articulated arm motor (with encoder)	✓

⚠️ Control panel, arms, safety devices, remotes, and accessories are not included and must be selected separately.

Technical Features

Feature	Specification
Motor type	24V articulated arm
Obstacle detection	Encoder-based
Speed control	Adjustable
Slow-down	Opening & closing
Emergency operation	Battery backup compatible (via control panel)
Compliance	EN tested

Is This the Right Motor for You?

This motor is suitable if:

You are replacing an existing CAME Stylo P24 motor
You are building a custom system with a separate control panel
Your gate leaf is up to 1.8m and 150kg
Pillar depth or geometry rules out a straight ram

You should consider another motor if:

The gate exceeds 1.8m
The gate is heavy steel or solid infill
The site is highly exposed to wind

ACS Team Insight

STYLO P24 is all about geometry, not brute force. It excels where narrow pillars or awkward hinge positions would cause problems for linear motors.

If you’re retrofitting or replacing a motor, double-check arm geometry and hinge offsets — small setup errors make a big difference on compact articulated motors. If you’re unsure, send us the measurements before ordering and we’ll sanity-check it with you.